|
 |
 |
|
Home>>Products>>Tank Valve
|
|
 |
| Safety Valve |
|
BSP RELIEF VALVE
 |
2.0 TECHNOLOGY FOR TANK VALVE
TIR by cast can be used for disassemble; Distance between columns can accommodate a C-wrench well; Thicker cover by casting is Stronger than sheet board especially during disassembly. |
Basic Details
2.5" BSP Super Maxi Emergency Relief Valve male connection with 65mm nominal bore. Suitable for a pressure range of between 2 - 75 PSI (0.14 - 5.17 Bar) and a vacuum range of between 0 - 26"Hg (0 - 0.88 Bar). Contact parts manufactured in 316 stainless steel. Fitted with combined seals as standard. Complete with rubber/PTFE tank seal. Flanged connections available. Range of high pressure extended body valves. Manual vent button option. A range of alternative seal materials is available.
Specification
| Weight |
2.97 KG |
| Design Temperature |
-40°C to 200°C |
| (-55°F to 392°F) |
|
Fitting Dimension
Example shown : 010-16312
|
|
| 1 |
Basic configuration |
| 2 |
Combined gasket; |
OPTIONAL COMPONENTS |
| 3 |
Blind flange for backup relief valve outlet; |
| 4 |
Vacuum sets. 6.2"standard pressure.
spring can be used for different pressure
from 0-26"Hg.; |
| 5 |
Welding flange or sink flange for lower total height; |
| 6 |
All kinds of gauges: STST/Brass material,
anti shaking, BSP/M thread, 0-7/10 Bar; |
| 7 |
Quick disassemble fire protection cover, which can
meet the flow rate requirement at the firing condition; |
| 8 |
Bolt kit; |
| 9 |
Transfer flange for gauge or burst disc; |
| 10 |
Combined gasket should be used without bust disk; |
| 11 |
Burst disc, cross slots 65/80 mm size, 20/55°C,
selection of 2.14 to 7.58 Bar, together with transfer
flange |
FLANGED RELIEF VALVE
 |
2.0 TECHNOLOGY FOR TANK VALVE
TIR by cast can be used for disassemble; Distance between columns can fit general C-wrench well; Thicker cover by casting is harder than sheet board especially during disassemble;1/4" BSP/NPT thread on both sides for different gauges. |
Basic Details
Inlet flange with 4 slots to suit DIN65 PN10 / DIN80 PN6 /3" ASA 150 BSTD with 80mm nominal bore. Suitable for a pressure range of between 3-75 PSI (0.21-5.17 Bar) and a vacuum range of between 0-26" Hg (0-0.88Bar). Contact parts manufactured in 316 stainless steel. Fitted with combined seals as standard. Pressure only version. High pressure extended body valves. Alternative seal materials are available, including high temperature option. Available with CE Marking.
Specification
| Weight |
6.7 KG |
| Design Temperature |
-40°C to 200°C |
| (-55°F to 392°F) |
|
Fitting Dimension
Example shown : 013-16312
|
|
| 1 |
Basic configuration |
| 2 |
Combined slots gasket, used for DIN65/80/3" ASA150 flange; |
OPTIONAL COMPONENTS |
| 3 |
Bolt kit; |
| 4 |
Welding flange or sink flange for lower total height; |
| 5 |
Vacuum sets. 6.2" standard pressure.
7104-XXX spring can be used for different pressure from 0-26"Hg (0-0.88Bar); |
| 6 |
Blind flange for backup relief valve outlet; |
| 7 |
All kinds of gauges: STST/Brass material, anti shaking, BSP/NPT thread, 0-7/10 Bar; |
| 8 |
Quick disassemble fire protection cover,which can meet the flow rate requirement at the firing condition; |
| 9 |
Crossed bust disc, 65/80 nominal size, 20/55°C,
2.14-7.58Bar |
BURST DISC
Our range includes stocks of standard 65mm and 80mm discs and more specialised discs for IMO V Gas Relief Valves (89mm) and Hydrogen Peroxide applications (250mm).We can offer the following models for different applications:
ICON - cross scored solid metal disc; PC-SERT - multi-layered (composite) disc; Reverse Acting and Standard 250mm discs.
| Part Number |
Type |
Set to burst at |
| |
| General Purpose Tank Containers / Road Tankers |
| 861-0320 |
50mm PC -SER T |
2.20-2.42 Bar @ 20°C |
| 861-0400 |
50mm PC -SER T |
2.76-3.10 Bar @ 20°C |
| 862-0310 |
65mm PC -SER T |
2.14 Bar @ 20°C |
| 862-0330 |
65mm PC -SER T |
2.28 Bar @ 20°C |
| 862-0350 |
65mm PC -SER T |
2.41 Bar @ 20°C |
| 862-0390 |
65mm PC -SER T |
2.69 Bar @ 20°C |
| 862-0430 |
65mm PC -SER T |
2.96 Bar @ 20°C |
| 862-0450 |
65mm PC -SER T |
3.1 Bar @ 20°C |
| 862-0540 |
65mm ICON |
3.67 Bar @ 20°C |
| 862-0600 |
65mm ICON |
4.1 Bar @ 20°C |
| 862-0640 |
65mm ICON |
4.4 Bar @ 20°C |
| 862-0700 |
65mm ICON |
4.84 Bar @ 20°C |
| 864-0540 |
80mm PC -SER T |
3.67 Bar @ 20°C |
| 864-0600 |
80mm ICON |
4.1 Bar @ 20°C |
| 864-0700 |
80mm ICON |
4.84 Bar @ 20°C |
| 864-0960 |
80mm PC -SER T |
6.62 Bar @ 20°C |
| 864-1100 |
80mm PC -SER T |
7.58 Bar @ 20°C |
| Compressed Liquefied Gas Tanks |
| 864-1750 |
89mm Reverse Acting |
12.1 Bar @ 55°C |
| 864-2000 |
89mm Reverse Acting |
13.8 Bar @ 55°C |
| 864-2180 |
89mm Reverse Acting |
15.0 Bar @ 55°C |
| 864-3050 |
89mm Reverse Acting |
21.0 Bar @ 55°C |
| 864-3190 |
89mm Reverse Acting |
22.0 Bar @ 55°C |
| 864-3990 |
89mm Reverse Acting |
27.5 Bar @ 55°C |
| 864-5000 |
89mm Reverse Acting |
34.5 Bar @ 55°C |
| Hydrogen Peroxide |
| 865-1200 |
250mm STD (new design) |
4.5 Bar @ 20°C |
| 865-1250 |
250mm STD (new design) |
4.5 Bar @ 60°C |
| 865-1400 |
250mm STD (new design) |
6.0 Bar @ 20°C |
HOLDER
| Part No. |
Description |
| 360-1010 |
75mm PVC cap with stainless steel cable |
| 460-1010 |
110mm PVC cap with stainless steel cable |
| 360-1007 |
75mm fixing bracket - plastic |
| 360-1007SS |
75mm fixing bracket - stainless steel |
| 460-1007 |
110mm fixing bracket - plastic |
| 460-1007SS |
110mm fixing bracket - stainless steel |
|
| |
|
Views:3607 Date:2012-4-27 [ Print ]
|
|
|
 |
|
|
 |
